Designed to meet the needs of the Professional Installer
RadCool realizes that it is important to build a product that meets the professional installer’s needs. RadCool also listens to its installers and incorporates their ideas and suggestions into the program to continually enhance the product.
Engineered to meet or exceed OE manufacturer’s specifications.
RadCool understands that meeting OE specifications is the starting point, but for vehicles that are under extreme conditions or high mileage you need to go beyond these specifications to manufacture a product that will last.
Award winning associates ready to assist you. Drop in fit, form and function
RadCool understands that it is very important that the radiator goes in as easily as the factory radiator comes out. It must look and function like the original unit.
Drop in fit, form and function
All RadCool Radiators are 100% tested up to three times during production.
Complete Radiators 100% tested up to three times during production
Radcool tests the transmission and engine oil coolers prior to installation into the tank. The radiator core is tested prior to assembly and then once the assembly is complete the unit is tested again.
Enhancements added to solve original design failures and to improve the life of high mileage vehicles.
RadCool tests the transmission and engine oil coolers prior to installation into the tank. The radiator core is tested prior to assembly and then once the assembly is complete the unit is tested again.
Enhancements added to solve original design failures and to improve the life of high mileage vehicles.
Today’s vehicles are on the road longer sometimes reaching 500,000 miles. They are also running hotter to meet emission regulations. RadCool is proud to say it has been able to solve many OE design problems with enhanced units. This is accomplished by adding more fins per inch, thicker cores and even larger transmission coolers to overcome the added heat associated with these vehicles.
RadCool transmission and engine oil coolers utilize the OES design and OES materials, including copper concentric, aluminum concentric, stainless steel plated and aluminum plated coolers. RadCool prides itself on following OE standards for construction and material type for longevity of the transmission and engine.
State of the Art Testing, Cycle, Vibration, Burst and Environment. RadCool realizes that testing is a very important part of learning how to continue to improve our products.
- Cycle testing is flowing preheated fluid thru the unit as the pressure is raised and decreased to imitate driving conditions a minimum of 30,000 cycles.
- Vibration testing is used to simulate pot holes, curbs and off-road use.
- Burst testing is the gradual increase of pressure till the unit fails, pointing out the weakest area of the unit.
- Environmental testing consist of salt and chemical spray imitating road conditions found driving during winter and coastal conditions.
The results are all used to create a unit with greater product longevity.
The results are all used to create a unit with greater product longevity.
Premium grade materials used for ensuring added product longevity
To produce the best product it starts with the highest grade raw materials. There are multiple levels of aluminum, stainless steel, copper, rubber and plastic. Cutting the quality in only one of these materials jeopardizes the whole unit.
Radiator coverage for the failure and crash markets
We have the unit that you need for replacement and crash markets. We are continually adding new numbers to expand our radiator line to over 2000 sku’s.
Radiator coverage for the failure and crash markets
We have the unit that you need for replacement and crash markets and we are continuing to add new numbers to expand our radiator coverage to over 2000 sku’s.
Engineered to meet or exceed OE manufacturer’s specifications.
Heavy Duty vehicles that are under extreme conditions or high mileage need to have a replacement radiator that is equal to or better than the OE part. Specifications must exceed those of a standard radiator and the material must be of the highest quality. Radcool Heavy Duty products are known and accepted as the best in the aftermarket.
Industry leading Technology
Wherever possible Radcool engineers will make improvements to the OE design to increase performance and the life span of the radiator. The research and development department are constantly looking at ideas to create a product that can withstand the extreme conditions that all truckers experience and continue to function at the highest level.
Drop in fit, form and function
RadCool engineers make certain that the radiator goes in as easily as the existing radiator comes out and that it looks and functions like the original unit.
RadCool offers installation kits in most of its HD Radiators. These kits often contain all of the mounting hardware and fittings necessary to do the job right the first time.
All HD Truck Radiators are 100% tested
The high cost of heavy duty truck radiators means that every radiator must be individually tested at the factory and stringent QC controls are in place.
All HD Truck Radiators are 100% tested
The high cost of heavy duty truck radiators means that every radiator must be individually tested at the factory and stringent QC controls are in palce.
State of the Art testing, Vibration, Burst and Environment
State of the art testing equipment is a very important part of learning how to continue to improve product. Vibration testing is used to simulate pot holes, curbs and off-road use. Burst testing is the gradual increase of pressure till the unit fails pointing out the weakest area of the unit. Environmental testing consists of salt and chemical spray imitating road conditions found driving during winter and coastal conditions. The results are all used to create a unit with greater product longevity.
Premium grade materials used for ensuring added product longevity
Producing the best product starts with the highest grade raw materials. Many of Radcool HD Truck Radiators utilize a stainless steel oil or transmission cooler versus the OE aluminum style. This provides a much longer life and better overall reliability.
Extensive HD Truck Radiator coverage
When other suppliers are boasting of 100 to 200 sku’s RadCool is continually adding to our 450+ sku offering. RadCool offers over 50 sku’s with frames.
Our product experts are here to help
Call us to speak to a trained service professional to learn about installation or selecting the right product.
Heavy Duty Techline
714-773-9791
Engineered to meet or exceed OE manufacturer’s specifications.
Radcool understands that meeting OE specifications is the starting point, but for vehicles that are under extreme conditions or high mileage you need to go beyond these specifications to have a product that will last.
Industry leading Technology
It is important to have the product of today but to also be looking forward to the new technologies of tomorrow. Radcool knows the value of investing in the future.
Drop in fit, form and function
Radcool believes that it very important that the condenser goes in as easily as the existing condenser comes out and that it looks and functions like the original unit.
All Condensers are 100% tested
Replacing a condenser is major job and very time consuming. This is why we do not batch test like other manufactures. All condensers go thru an intense high-pressure test to insure there are no leaks.
State of the Art testing, Vibration, Burst and Environment
Testing is a very important part of learning how to continue to improve product. Vibration testing is used to simulate pot holes, curbs and off-road use. Burst testing is the gradual increase of pressure till the unit fails pointing out the weakest area of the unit. Environmental testing consists of salt and chemical spray imitating road conditions found driving during winter and coastal conditions. The results are all used to create a unit with greater product longevity.
Premium grade materials used for ensuring added product longevity
When producing the best product it starts with the highest grade raw materials. There are multiple levels of aluminum and zinc. Cutting the quality and type of aluminum and zinc jeopardizes the whole unit.
Industry Leading Condenser coverage
When other suppliers are boasting of 400 to 600 sku’s Radcool is continually adding to our 1000 plus sku offering.
Extensive crash market coverage
Radcool is always expanding on its Crash market coverage to meet the needs of the crash market and paying close attention to the design to be able to meet the requirements of the professional installer and Insurance companies.
Designed to meet the needs of the Professional Installer
Radcool realizes that it is important to build a product that meets the professional installer’s needs. Radcool also listens to its installers and incorporate their ideas and suggestions into the program to continually enhance the product.
Engineered to meet or exceed OE manufacturer’s specifications
Radcool understands that meeting OE specifications is the starting point, but for vehicles that are under extreme conditions or high mileage you need to go beyond these specifications to have a product that will last.
Drop in fit, form and function
Radcool’s understands that it very important that the heater goes in as easily as the existing heater comes out and that it looks and functions like the original unit.
Heaters are 100% tested
Radcool understands that replacing a heater is major job and very time consuming. This is why we do not batch test like other manufactures. All heaters go thru an intense high pressure test to insure there are no leaks.
Radcool Charge Air Coolers are welded tube stuffed with internal fins design to match OE
For a truly outstanding performance, the welded fins provide maximum efficiency in heat exchange.
Tanks are die cast molded (not sand cast) like the cheaper products
Our products are produced based on quality specs. A Sand-Cast based production considered more cost effective by some of our competition, however this cost savings comes at a steep price for the consumer.
Radcool Charge Air coolers are die cast molded. The advantages are higher precision, more intricate design and ultimately a higher quality model.
Tanks are welded to the header by robotic Mig welders for a stronger and cleaner weld
Precision, accuracy, quality at the highest standard. That is our commitment to our clients.
Tanks and cores are designed and produced to exceed OE performance
… In plane English: Our commitment is to take the specifications of the original automotive part, and not only match – but improve it.
Fit form and function meets or exceeds OE for a drop in fit
Not only do we have the end user in mind, who will end up with a quality product under their hoods, we know that the installer is an important part of the chain. A worry-free installation with parts exacting dimensions, that fit exactly in the vacancy of the original. Our promise to you is a “DROP IN FIT”. A Promise that can’t be made by all of our competition, and a promise that we don’t take lightly.
Factory QC on every unit.
We are obsessed with the quality of our products. Each part is checked – and re-checked – up to 3 times.